PRODUCT TECHNICAL SPECIFICATIONS

AC Input Voltage: 90 to 132 or 180 to 264 Auto selectable 50 to 60 Hz.

DC Output: 300W maximum

Noise Test – Noise bandwidth is from DC to 20 MHz.

Ripple frequencies greater than 1MHz shall be attenuated by the measurement System.

Add 0.1uF/10uF capacitor at output connector terminals for ripple and noise measurements

The combined total power from 5V & 3.3V shall not exceed 180W.

The combined total power from +5V and +12V & +3.3V shall not exceed 278W.

+5V SB DC Output 2A.

PS-ON

Remote On/Off Control:

When PS-ON is pulled to TTL Low, the DC output is to be enabled.

When PS-OFF is pulled to TTL high, the DC output is to be disabled.

PW-OK

PW-OK is power good signal and should be asserted high by the power

supply to indicate that +5VDC and +3.3VDC output are above the under voltage thresholds of the power supply TTL. compatible signal out with 100ms to 500ms.

Outside of USA email me with your addres for shiping calculations.